Chapter 07 Review Problems

Review problems for Chapter 7 on thermochemistry: system and surroundings, heat and work, the first law, enthalpy, calorimetry, and Hess’s law.
Generate PDF

Thermochemistry Basics

Quick Reference

Every equation used in this chapter, from q = mcΔT to the first law and Hess’s law, is collected on the Equations reference page.

A chemist is studying the process of melting sugar in a pot on a stove. If the chemist defines the sugar as the system, which of the following is best classified as the immediate surroundings?

  1. The heat flowing into the sugar
  2. The pot and the stove burner
  3. The air in the kitchen
  4. The temperature of the sugar
Solution

Which of the following is not a type of potential energy (select all that apply)?

  1. Energy held in chemical bonds
  2. Energy resulting from intermolecular attractions
  3. Energy from the random motion of molecules
  4. Energy of a ball in motion
Solution

Which of the following is true of heat (select all that apply)?

  1. Heat is a form of thermal energy.
  2. Heat is the transfer of thermal energy.
  3. Heat is the action of forces through a distance.
  4. A negative q for the system means the surroundings lose energy.
  5. A negative q for the system means the system loses energy.
Solution

Which of the following are false (select all that apply)?

  1. Energy can be converted from one type to another.
  2. Energy is the capacity to do work.
  3. Kinetic energy is energy resulting from condition, position, or composition.
  4. Potential energy is energy transferred between a system and its surroundings as a result of a temperature difference.
Solution

A block of ice absorbs heat and melts. The value q for the system is:

  1. Positive
  2. Negative
  3. Zero
  4. There is not enough information to determine.
Solution

Heat, Work, and the First Law

Suppose 1.30 kJ of energy is removed by a refrigeration unit from a 2.19 kg sample of brass (cp(brass) = 0.380 J g−1 °C−1) at a temperature of 24.6 °C. A scientist wants to calculate the new temperature of the sample.

  1. What are the surroundings in the above problem?
    1. the refrigeration unit
    2. the sample of brass
    3. the sample of brass and the refrigeration unit
    4. none of the above
  2. Which equation applies?
    1. qcal = −qrxn
    2. q = mcpΔT
    3. q = CcalΔT
    4. none of the above
  3. Is q for the system positive or negative?
    1. positive
    2. negative
  4. Which of the given values must be converted to match the units of the specific heat?
    1. energy (q)
    2. mass (m)
    3. temperature (T)
  5. Fill in the correct values for the brass sample (system): energy (in J), mass (in g), and temperature (in °C).
    1. Energy:
    2. Mass:
    3. Temperature:
  6. What is the new temperature (in °C) of the sample of brass?
Solution

If a system cools from 299 K to 294 K, what is the sign of q?

  1. positive
  2. negative
  3. impossible to know
Solution

A container holds 2.00 L of water. How much heat (in J) is required to warm the water from 25.0 °C to 100.0 °C? (ρ(H2O) = 1.00 g mL−1; cp(H2O) = 4.184 J g−1 °C−1)

Solution

A 3.10 g piece of solid copper is initially −12.0 °C and absorbs 58.4 J of energy. What is the final temperature (in °C) of the copper? (Cp,m(Cu) = 24.4 J mol−1 °C−1)

Solution

A container contains 135.5 g H2O(l) at 17.2 °C. A 32.2 g piece of solid Al at 47.1 °C is placed in the container. What is the final temperature (in °C) of the system? (cp(Al) = 0.897 J g−1 °C−1; cp(H2O) = 4.184 J g−1 °C−1)

Solution

A gas expands from 2.00 L to 10.00 L against a constant external pressure of 2.50 atm while absorbing 5.00 kJ of heat. Calculate (a) the work, w (in kJ), and (b) the change in internal energy, ΔU (in kJ). (1 L atm = 101.325 J)

Solution

Calorimetry

A 1.000 g sample of benzoic acid (C6H5COOH(s)) is combusted in a bomb calorimeter; the calorimeter temperature rises from 22.00 °C to 25.26 °C. What is ΔcU (in kJ mol−1) for C6H5COOH?

\[\mathrm{C_6H_5COOH}(\mathrm{s}) + \tfrac{15}{2} ~ \species{oxygen}{\mathrm{O_2}}(\mathrm{g}) \longrightarrow 7 ~ \species{carbon-dioxide}{\mathrm{CO_2}}(\mathrm{g}) + 3 ~ \species{water}{\mathrm{H_2O}}(\mathrm{l})\]

(M(C6H5COOH) = 122.1 g mol−1; Ccal = 8.105 kJ °C−1)

Solution

Reaction Enthalpy

A propane (C3H8(g)) furnace releases 7.50 × 105 kJ of heat. What mass (in kg) of C3H8 was consumed?

\[\species{propane}{\mathrm{C_3H_8}}\mathrm{(g)} + 5~\species{oxygen}{\mathrm{O_2}}\mathrm{(g)} \longrightarrow 3~\species{carbon-dioxide}{\mathrm{CO_2}}\mathrm{(g)} + 4~\species{water}{\mathrm{H_2O}}\mathrm{(g)} \qquad \Delta_{\mathrm{r}} H^{\circ} = -2044~\mathrm{kJ~mol^{-1}}\]

Solution

Hess’s Law and Formation Enthalpies

Using Hess’s law, calculate ΔfH° (in kJ mol−1) for ethane:

\[2~\mathrm{C(s,~graphite)} + 3~\species{hydrogen}{\mathrm{H_2}}\mathrm{(g)} \longrightarrow \species{ethane}{\mathrm{C_2H_6}}\mathrm{(g)}\]

given the following data:

\[ \begin{array}{lcrllll} \textrm{Reaction 1:} & & \mathrm{C(s,~graphite)} + \mathrm{O_2(g)} &\longrightarrow& \mathrm{CO_2(g)} & & \Delta_{\mathrm{f}} H^{\circ} = -393.5~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 2:} & & \mathrm{H_2(g)} + \tfrac{1}{2}~\mathrm{O_2(g)} &\longrightarrow& \mathrm{H_2O(l)} & & \Delta_{\mathrm{f}} H^{\circ} = -285.8~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 3:} & & \mathrm{C_2H_6(g)} + \tfrac{7}{2}~\mathrm{O_2(g)} &\longrightarrow& 2~\mathrm{CO_2(g)} + 3~\mathrm{H_2O(l)} & & \Delta_{\mathrm{c}} H^{\circ} = -1559.7~\mathrm{kJ~mol^{-1}} \\[0.2ex] \end{array} \]

Solution

Using Hess’s law, calculate ΔfH° (in kJ mol−1) for diboron trioxide:

\[2~\mathrm{B(s)} + \tfrac{3}{2}~\species{oxygen}{\mathrm{O_2}}\mathrm{(g)} \longrightarrow \species{boron-trioxide}{\mathrm{B_2O_3}}\mathrm{(s)}\]

given the following data:

\[ \begin{array}{lcrllll} \textrm{Reaction 1:} & & \mathrm{B_2O_3(s)} + 3~\mathrm{H_2O(g)} &\longrightarrow& \mathrm{B_2H_6(g)} + 3~\mathrm{O_2(g)} & & \Delta_{\mathrm{r}} H^{\circ} = +2035.4~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 2:} & & \mathrm{H_2O(l)} &\longrightarrow& \mathrm{H_2O(g)} & & \Delta_{\mathrm{vap}} H^{\circ} = +44.0~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 3:} & & \mathrm{H_2(g)} + \tfrac{1}{2}~\mathrm{O_2(g)} &\longrightarrow& \mathrm{H_2O(l)} & & \Delta_{\mathrm{f}} H^{\circ} = -285.8~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 4:} & & 2~\mathrm{B(s)} + 3~\mathrm{H_2(g)} &\longrightarrow& \mathrm{B_2H_6(g)} & & \Delta_{\mathrm{f}} H^{\circ} = +36.4~\mathrm{kJ~mol^{-1}} \\[0.2ex] \end{array} \]

Solution

Using standard enthalpies of formation, calculate ΔrH° (in kJ mol−1) for:

\[4~\species{ammonia}{\mathrm{NH_3}}\mathrm{(g)} + 5~\species{oxygen}{\mathrm{O_2}}\mathrm{(g)} \longrightarrow 4~\species{nitric-oxide}{\mathrm{NO}}\mathrm{(g)} + 6~\species{water}{\mathrm{H_2O}}\mathrm{(l)}\]

Solution

A metropolitan area consumes 1.0 × 1011 kJ of energy daily from gasoline, modeled as the combustion of pure liquid octane (C8H18(l)). Using the standard formation enthalpies provided, determine the daily mass (in kg) of C8H18 required to meet this demand.

\[\species{octane}{\mathrm{C_8H_{18}}}\mathrm{(l)} + \tfrac{25}{2}~\species{oxygen}{\mathrm{O_2}}\mathrm{(g)} \longrightarrow 8~\species{carbon-dioxide}{\mathrm{CO_2}}\mathrm{(g)} + 9~\species{water}{\mathrm{H_2O}}\mathrm{(g)}\]

Solution

Using Hess’s law, calculate ΔfH° (in kJ mol−1) for acetylene:

\[2~\mathrm{C(s,~graphite)} + \species{hydrogen}{\mathrm{H_2}}\mathrm{(g)} \longrightarrow \mathrm{C_2H_2(g)}\]

given the following data:

\[ \begin{array}{lcrllll} \textrm{Reaction 1:} & & \mathrm{C_2H_2(g)} + \tfrac{5}{2}~\mathrm{O_2(g)} &\longrightarrow& 2~\mathrm{CO_2(g)} + \mathrm{H_2O(l)} & & \Delta_{\mathrm{c}} H^{\circ} = -1300.2~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 2:} & & \mathrm{C(s,~graphite)} + \mathrm{O_2(g)} &\longrightarrow& \mathrm{CO_2(g)} & & \Delta_{\mathrm{c}} H^{\circ} = -393.5~\mathrm{kJ~mol^{-1}} \\[0.5ex] \textrm{Reaction 3:} & & \mathrm{H_2(g)} + \tfrac{1}{2}~\mathrm{O_2(g)} &\longrightarrow& \mathrm{H_2O(l)} & & \Delta_{\mathrm{c}} H^{\circ} = -285.8~\mathrm{kJ~mol^{-1}} \\[0.2ex] \end{array} \]

Solution